We offer that the stud welding system to the inspection machine to development, manufacture and sales by in-house consistent system.


Welding machine and Welding gun

Our target is a thing to offer the stud welding system of the high quality speedily.
Original welding system development in technology, In manufacturing, it is a high-speed, steady production system, and We answer an advanced demand of a manufacturing sales and other customer of weliding stud, female stud, and various industrial fasteners by abundant knowledge that has been cultivated so far and certain technologies.
As a special manufacturer, in-house consistent system from technological development to sales is the proof.

Welding machineWelding gunArticle of sonsumption

Welding machine

  • A newly developed superprecision microcomputer control circuit and the remote control function are installed in the CD-R series.
  • It is possible can do power on/off,displaying voltage and setting up voltage by remote control CR-500().
  • It is possibel to operate and comfirm that 【Up/Down setting of charge voltage】【Precise digital display of charge voltage】【LED display】.
  • The slim body has the welding power of room. A certain, steady welding can be done.
  • 【Welding ready】【Welding OK】【Gun switch ON】【Safety circuit is operating】etc. The machine automatically judges, and it displays exactly by LED blinking, Changing/Lighting color, it informs by the alarm also.
  • The capacity of the condenser can be easily switched with the switch of the operation panel, and highly accurate welding energy be adjusted.
  • It corresponds to all models and the gap methods.Stability welding of aluminum titanium stud by < Super-trice electrical discharge start circuit >.
  • It is possible to set up the charge voltage up and down freely like state that the power supply "on".
  • Even if the input voltage changes between 90-110V(180-220V), the welding by the charge voltage always set is possible.
  • The CD-800iv type is possible to use freely that input voltage between 90V and 260V.
  • It is not choose the power supply, and it is possible to use even in Japan and foreign countries without the setting change.

Lineup

CD-800A
catalogue downloadPDF

CD-800A  Basic low cost type

Suited gun
:A-50/A-100/A-300
Suitede stud
:Diameter / 1.6~M8 Length / 5~150L(A-50・A-100)
Outer diameter of internal thread
:~φ10(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:1Phase(2 wires) 100V AC ±10% 20A 50/60Hz
Charge voltage
:DC30~180V (Changing possible)

Charging time/3~5 sec
Condenser capacity
:Switch none
 
Dimensions
:L470×W220×H340(mm)
Weight/25kg Remote control: none

CD-600R
catalogue downloadPDF

CD-600R  Intelligent series of microcomputer control

Suited gun
:A-50/A-100/A-300
Suitede stud
:Diameter/1.6~M6
Length/5~150L(A-100)
Outer diameter of internal thread
:~φ8(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:1Phase(2 wires) 100V AC ±10% 15A 50/60Hz
Charge voltage
:DC30~200V (Changing possible)

Charging time/3~5 sec
Condenser capacity
:Possible to switch. 100%&50%
 
Dimensions
:L386×W180×H422(mm) Weight/16kg
:Remote control:CR-500(

CD-800R
catalogue downloadPDF

CD-800R  Intelligent series of microcomputer control

Suited gun
:A-50/A-100/A-300
Suitede stud
:Diameter/1.6~M8
Length/5~150L(A-50・A-100) / 5~50L (A-300)
Outer diameter of internal thread
:~φ10(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:1Phase(2 wires) 100V AC ±10% 20A 50/60Hz
Charge voltage
:DC30~200V (Changing possible) 
Charging time/3~5 sec
Condenser capacity
:Possible to switch.  100%&35%
 
Dimensions
:L456×W180×H422(mm) Weight/19kg
:Remote control:CR-500(Option

CD-1000R
catalogue downloadPDF

CD-1000R  Intelligent series of microcomputer control

Suited gun
:A-50/A-100/A-200/A-300
Suitede stud
:Diameter/1.6~M10
Length/5~150L(A-50・A-100) / 5~50L (A-300)
Outer diameter of internal thread
:~φ12(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:1Phase(2 wires) 100V AC ±10% 30A 50/60Hz
Charge voltage
:DC30~200V (Changing possible) 
Charging time/3~5 sec
Condenser capacity
:Possible to switch.  100%&50%&15%
 
Dimensions
:L537×W248×H421(mm) Weight/35kg
:Remote control:CR-500(Option

CD-800i
catalogue downloadPDF

CD-800i  Input voltage free type of inverter control

Suited gun
:A-50/A-100/A-300
Suitede stud
:Diameter/1.6~M8
Length/5~150L(A-50・A-100) / 5~50L (A-300)
Outer diameter of internal thread
:~φ10(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:相(1Phase) 90~260V AC ±10% 20A 50/60Hz
Charge voltage
:DC30~200V (Changing possible) 
Charging time/3~5 sec
Condenser capacity
:Switch none.
 
Dimensions
:L360×W175×H405(mm) Weight/11kg
Remote control: none
Option
Gap:lift up reshuffling function

CD-12R
catalogue downloadPDF

CD-12R Mass powerful type

Suited gun
:A-50/A-100/A-200/A-300
Suitede stud
:Diameter/1.6~M12
Length/5~150L(A-50・A-100) / 5~50L (A-300)
Outer diameter of internal thread
:~φ14(MAX)
 
Stud materials
:Mildsteel/StainlessSteel/Brass/Copper
/Aluminium/Titanium
Power
:1Phase(2 wires) 200V AC ±10% 30A 50/60Hz
Charge voltage
:DC30~200V (Changing possible) 
Charging time/3~5 sec
Condenser capacity
:Switch none.
 
Dimensions
:L900×W600×H800(mm) Weight/95
Option
:Remote control:CR-500(Option

Get Adobe Reader ADOBE READER is necessary to open a PDF files.
Get!ADOBE READER

Welding gun

The welding gun is divided depending on the material and the welding method etc. of the stud, and we're preparing the following models as a standard issue.

Please check here about the method of welding the stud.

A-100

A-100

Welding method
:Contact(Standard)
Stud dia
:1.6~8mm (10mm)
Stud length
:5~150mm (25mm)
Weight(Main body)
:650g
Stud materials
:Mild steel/Stainless steel/Brass/Copper
Gun cable/Control cable 6m (standard accessory)

The size on the ( ) uses long-reg and special collet


A-300

A-300

Welding method
:Gap
Stud dia
:1.6~8mm
Stud length
:5~150mm
Weight(Main body)
:720g
Stud materials
:luminium/Titanium
Gun cable/Control cable 6m (standard accessory)

A-50

A-50

Welding method
:Contact(※Possible to strike the corner.)
Stud dia
:1.6~8mm (10mm)
Stud length
:5~50mm (25mm)
Weight(Main body)
:650g
Stud materials
:Mild steel/Stainless steel/Brass/Copper
Gun cable/Control cable 6m (standard accessory)

Corner strike using combinely type can be welded that close to the mother material standing up up to about 11mm.
The size on the ( ) uses special collet


A-200

A-200

Welding method
:Contact(Strong type)
Stud dia
:1.6~12mm
Stud length
:5~150mm
Weight(Main body)
:850g
Stud materials
:Mild steel/Stainless steel/Brass/Copper
Gun cable/Control cable 6m (standard accessory)

Article of sonsumption

Collet

Collet is important parts that fix the stud, and throw the welding current.
We prepare it according to the size of each welding gun / stud.

The Collet is an articles of consumption.
The Collet must use the one that is sure to suit the size of the gun stud.

AC

AC

Suited gun
:A-100/A-200/A-300
Appellation
:AC-M3・M4・M5・M6・M8・M10・M12

ACH

ACH

Suited gun
:A-50
Appellation
:ACH-M3・M4・M5・M6・M8・M10

ACJ

ACJ

Suited gun
:A-100(When corner adaptor is used)
Appellation
:ACJ-M3・M4・M5・M6

ACP

ACP Length of stop bar adjustment type

Suited gun
:A-100/A-300
Appellation
:ACP-M3・M4・M5・M6・M8


Stop bar

The stop bar is installed with parts that maintain the projection size of the stud according to the kind of the collet and the length of the stud in the welding gun.

AST

AST

HST

HST

For CD Stud
Suited gun
:AST/A-100・A-200・A-300  HST/A-50
Appellation
:AST(HST)-06・08・10・12・15・20・25・30・35・40・45

A6ST

A6ST

H6ST

H6ST

For φ6 Female Stud
Suited gun
:A6ST/A-100・A-200・A-300  H6ST/A-50
Appellation
:A6ST(H6ST)-05・06・08・10・12・15・18・20

A8ST

A8ST

H8ST

H8ST

For φ8 Female Stud
Suited gun
:A8ST/A-100・A-200・A-300  H8ST/A-50
Appellation
:A8ST(H8ST)-06・08・10・12・15・18・20・25・30・35・40・45